`
Back to the newsroom
Certifier TÜV Nord hands over documents at Hamburg WindEnergy trade fair / Measurement campaign at prototype site successfully completed
ENERCON has received the type certificate for its E-138 EP3 E3 turbine type. The expert organisation TÜV Nord, as the appointed certifier, officially handed over the documents today (26 September) at the Hamburg WindEnergy trade fair.
As part of the measurement and validation campaign, the loads, power curve and sound power levels were successfully measured at the prototype site in Staphorst, Netherlands. On completion of the measurement programme, the prototype was handed over to the customer.
The E-138 EP3 E3 has a rotor diameter of 138 metres, a rated output of 4.26 MW and is available with different tower variants with hub heights of 81 to 160 metres. With a wind class IIA rating, it is currently suitable for weak to medium wind locations. Like all current ENERCON turbine types, the E-138 EP3 E3 is based on the E-nacelle concept with E-technology integrated into the nacelle.
‘We are delighted to have received the type certificate,’ says EP3 Product Manager Sascha Exner. ‘This is an important milestone in our product roadmap, which will soon be followed by further important steps. The E-138 EP3 E4, with which we will standardise the nacelles of the EP3 and EP5 platform, is already in development.’
This EP3 turbine type will then be fitted with the self-supporting nacelle covering that has already been introduced on the EP5 platform. Based on the successful prototype measurement and further developments, ENERCON will also offer an improved power curve for the E4, which will enable around 1.5 per cent more annual energy yield (AEP). In addition, a more robust version for typhoon requirements in Asian markets is under development, and there will be new steel towers for Europe with 111 metres and for Japan with 99 metres.
Deliveries of the E4 in Europe will start at the beginning of 2026.
ENERCON's current product portfolio will also be the focus of the company's presence at Hamburg WindEnergy (until 27 September).
Visit us at the international trade fair (Hall A4, Stand 244) to find out more about our range of products and services!
As a pioneer of wind energy technology and a committed supporter of the energy transition, we have specialised in developing, producing, selling and servicing onshore wind turbines. Pursuing our mission of ‘Energy for the world’, we have been championing sustainable energy generation from onshore wind since 1984. Thanks to our innovative wind turbine technology, high quality standards and many years of experience, we are one of the industry’s leading manufacturers anywhere in the world.
After 12 years, the CNE sales team secures its first major order for 7 x E-160 EP5 with a total capacity of over 38 MW.
As of 2026, top model will be available with 7.0 MW and tower of 175 metres
Gold medal in the ‘Drivetrains’ category for new E-175 EP5 E2
Extensive test series planned at Research & Development in Aurich
